See the Wired Security Camera Troubleshooting guide for details. The blue recording light is hardware-based and therefore cannot currently be turned off on the Blink indoor cameras. If you prefer, you can certainly cover this light with a piece of tape to block it - this will not impact the operation of the camera. Other X1 TV Box models (Xi3, Xi4, XiD and XG2) only have one power light. The one green light is the power indicator and the others are for the VCR and DVD source options on the front … read more To troubleshoot the DVR / NVR system not powering on: If applicable, check the back of the DVR / NVR to ensure that the switch is powered on. *Note**: Only RNG150 and XG1 TV Boxes have LED displays. My four cameras on my 960H all say video loss and the hdd light is blinking red. In the case of the TiVoHD Series3, a flashing green light always indicates a motherboard problem. Power LED flashing rapidly and camera offline? Camera to extension cable connection. If you have confirmed that the cameras are getting power and they are connected to the DVR correctly you can try a reset on the DVR. Back to the red flashing record light, wait again. Light is steady when a phone call is in progress. Contact Us. DVR Video IN or Camera IN ports have become damaged. More Information about this problem. It appears the system is trying to install a new update that allows you to see the last few channels viewed when hitting the Back button. Support; Troubleshooting guides; Power LED flashing rapidly and camera offline? Finally, at the nightly download time, the TV screen shows the popup stating that the receiver is about to shutdown for nightly downloads. I have a toshiba DVR620KU that has blinking green lights on the front of the unit. You can skip this step for now. I already tried a hard reboot and it did not work. What does this mean? What do the Lights on the Front Panel of my DVR Mean? (from a DVR-4900) (from a DVR-5580) Here is an overview of the things we need to check: 1. 0. Move the camera(s) to a different channel. I have the same issue. Joe Doe March 25, 2020 08:07; Hi all, came to my n28web dvr yesterday and all the LAN/WAN lights are flashing in unison aswell as one front light, the unit is not working or responsive, any ideas. I have three FiOS One minis, and the install has happened on all of them with no issues. 12 hours passes still flashing, Others have suggested sticking a USB stick in front panel port - nothing happened for me, so i continue to wait. The table below shows the meaning of the lights: Green Power is on: Amber/Yellow: Light flashes when a signal is received from the remote. Channels with audio are not selected. Top. There is a Picture, but no Sound. The lights on the front panel provide important information about the status of your DVR. There may be an issue with the camera or camera extension cable. Please advise. Dvr lan lights all flashing Follow. Hello. In later model units (Series4 and above), flashing lights typically indicate a drive problem, but depending on the interval of the flashing, it could be a motherboard or power supply. For some you who installed the cameras already and forgot to test the cameras first, that's alright. Hello, I have a Swann DVR problem, the model is a SWDVR-94200H, the unit hasn't functioned for the past week, upon trying to restart the unit (unplug, wait 10 seconds, re-plug) the unit would show the "Welcome Screen" 3 seconds later the screen would "Go Blank", no picture, no remote access, no mouse control function, not even the computer remote view … Question The light on my X1 box keeps flashing. On the main box, however, no installation has taken place, and the light keeps flashing green. Answer Below you will find a list of our X1 boxes and what the lights mean. If your DVR / NVR system is not powering on, it may be related to several issues including the power adapter being used, the power switch on the recorder, or the power source being used.