The slides he uses have to come in that length needed. If drawers are improperly installed, overloaded, slammed too hard or abused they can get sloppy. We turned the dresser upside down so that we could examine the bottom drawer track carefully. In track, no levers. The half-opening drawers would stop with a sort of softness, but then would not open further. Others have a catch on … Dresser drawers open and shut through a system of rollers and slides, otherwise known as tracks. I have been able to fix the chipped off part, it is usually in the bottom of the drawer area. (12/28/2008), A bar of soap works just as well as wax, doesn't stain the clothes in the drawer below the runner, and keeps the bugs away. 03/14/2020. Good luck. I worked at a furniture store once and we would put a light under the piece of furniture to get rid of the moisture from the wood. Is there a way i can release the mechanism or disable it? (12/05/2006), If it's an older piece of furniture, try the candle method - of waxing the treads. But how do I get them open? If so, don't worry; you're far from out of options. Just keep removing the drawers as you can. So what can I do without damaging the dresser? Drawer next to it opens fine. Verified Buyer. This brand new dishwasher by Bosch has a large dent on the top, that won't allow the top drawer to open all the way. Make stuck drawers open smoothly again with a little paraffin or special nylon tape that lubricates those rubbing, sticky surfaces. that goes on the end of the metal guide under the drawer. I have taken the bottom 2 drawers out and can see a piece of wood with a horizontal bit sticking out to the side. John John. After boring an off-center hole through the block ¾ inch from one end, screw it to the rear of the drawer. Separate the runners. Three drawers in my dresser are stuck; the bottom two open fine. Contractor's Assistant: I'll do all I can to help. I wax the runners to help them glide in and out. We really do like the set-- it goes with the trim and the style of that room, but we couldn't get the drawers out. With deeper drawers I would also insist on full extension giving you access to the entire drawer. Drawers that don’t slide smoothly can be a real nuisance. Surprisingly, after the home was sold, she found she actually liked not having a dresser. You have to give it a little push at the end for it to be flush. Self-adhesive nylon tape lubricates rubbing surfaces. Of course, you must have the piece inside in an air conditioned room. Finding Roof Repair Assistance for Seniors? After closing the top drawer of my 4 door dresser, i tried to open another drawer. When a drawer won't close all the way or slides open at the most inopportune times, it can be a nuisance at the least and a safety hazard at the most. 2. The screws on the metal tracks MUST be ABSOLUTELY FLUSH with the metal track. Put the drawer back on the runners. Its obviously something to do with the mechanism that only allows one drawer open at a time. Repairing Furniture with Bondo . I had to sand off a fair bit of particle board to make room for the plastic, and now they work fine. Good luck. Right? Use a screwdriver to unscrew it. Instead of replacing the whole piece of wood (including the dovetails), you can repair the area and build the drawer back up. Most hardware stores will have replacement parts for the repair. Varied, to provide storage for every taste
One thing is certain: you can’t go wrong with this 4 drawer dresser! I know from my own roll piece (mine has a draw door roll--not the roll top but it has the same issues as a roll top sometimes), that there are stops and things that can get turned that need turned back. Drawers, like those from dressers, are made to smoothly open and close. In some models, you can keep gently pulling the drawer after it stops and it will release and come out. This is honestly one of my top 3 pieces of furniture in my house - highly recommend!! Unfortunately some newer furniture is made very cheaply - we had some particle board dressers with uneven threads for the drawers - which we couldn't manage to fix & finally just tossed! This versatile dresser blends in easily with any décor and it’s incredibly easy to maintain. Sometimes it's engaged by a spring, sometimes by gravity. Then you can take an old candle, or paraffin wax, and rub the runners really good on the bottom of the drawer. We have tried rearranging them, but there is always one that won't go in all the way (the top edge gets caught). :D. How do I open them without damaging anything? A YouTube video clearly shows this. Only issue - wish drawer had a "catch' to keep it from pulling all the way out (that would ahve earned this great piece 5 stars!). Have you pulled the drawer all the way out to see if something is stuck behind it? I have had it for 4 years - type 20FDBM I had a problem where a couple of drawers in a 4 drawer dresser would only slide halfway out. If they have glides, clean them out while you have the drawer out. Fixing Dresser Drawers That Stick After Painting. This has nice deep drawers that go all the way to the back of the dresser. Any suggestions? A numer of times I've had drawers not open due to their bottom panels sagging down or falling out of their grooves. Place this runner on the left side of the drawer. So how do you remove a dresser drawer with a center metal slide? Are you having trouble opening your filing cabinet drawer? Bring plenty of storage space and modern style to your bedroom with this product. Any ideas on why the top three drawers are stuck? Really nice - easy to assemble. Loose drawer knobs can eventually fall off the face of a drawer, leaving you without a convenient way to open it. I recently got a used dresser, and when we went to put in the drawers, one of them will not go all the way in. For the normal drawers, they would stop with a sudden, hard resistance. Beautifully rounded moldings and clean lines offer a traditional Louis Philippe style that will complement many decors. Ask a QuestionHere are the questions asked by community members. Also, if you have keys on the drawers, they can get jammed up if the key does not fully release the lock. I would not put anything on the drawers until you are sure of the problem. Glue it back on. Don't decide between storage and a stylish look in your space: Get both with this 6-drawer dresser. Follow answered May 16 '13 at 12:06. It should work after only one or two applications of the wax on the drawer bottom(s). Plus I think the wax may help with getting dampness in the wood. Love the style but the color is way off! It seems unlikely a table drawer could have anything underneath stopping it, but do look under the table at the underside of the drawer. I so appreciate the video showing how to attach the wood block/toggle to the drawer. That makes it hard to fish out stuck behind a dresser drawer. It helps it to slide more easily. My drawer would only open about 3 inches but then there was the lip of the cutlery tray to contend with. I tried a plastic flexible cutting board as suggested above, a wire coat hanger and a wooden ruler but they were all too short. Almost all drawers have "catch" mechanisms built in to prevent the drawers accidently pulling all the way out when being opened, and thus "dumping" all their contents on the floor, or worse, falling on your foot and causing injury. They don’t pull out all of the way which I’m sure is to prevent it from falling over if all the drawers are open at once. Was it worth it? Simple is better! 2) So you don’t lean on the extended drawer and rip it off. I've done that and avoided future problems. How to Adjust Drawers. But none of them will open now! They have not been painted shut but are stuck because they got damp/wet. Open the drawer as far as possible. This storage chest was made to withstand everyday use and look good doing it. Mrs. C December 6, 2017 at 2:02 pm. And just to clarify, what's the exact model? I bought some 18” soft-closing drawer slides from Menards and I can’t (FOR THE LIFE OF ME) get them to shut all the way. Open and close it a few times to see if your repair job was successful. You can also use paraffin wax, which also works great for stuck clothing zippers. I can physically close the drawer all the way, but the soft close just won’t close it all the way. Two of the drawers of my father's roll top bureau are stuck. Wiggle each slide with your fingertips. Drawer slides come in set sizes and maybe this is what he is set up to do and just builds them all that way. I wax the runners to help them glide in and out. AKA, it's serving up some major mid-century vibes. ~ by Sandi. (It probably isn't damp, this being Phoenix, AZ.) It's a 5-minute fix. You can coat the bottom of the edges of the drawers with soap. Any idea what part I should try to purchase? Which should make it more obvious there’s a stopping mechanism behind it. I have always found annoying that some drawers open only 34 of the way leaving the back half of the drawer not easily accessible, but this one opens a little more- probably 45 of the way. How to Adjust Drawers. (12/05/2006). Step 1. If it's like my dressers, they are solid, vintage wood, that swell in the humidity. How to Tighten Loose Drawer Knobs. It may like to stay open just a couple of inches or so, or it may swing open all the way after you try to close. The next day, it would have all the drawers free and easy to open. Only just. Helpful . I’m sure there’s probably a good design reason for it. The next day, it would have all the drawers free and easy to open. Then, turn the block vertically and push the drawer all the way in. Step 2: Then the users need to press down the levers at the same time and the best way to accomplish this step is to use both the thumbs or the forefingers in order to dissociate the levers while upholding the base of the drawers with the rest of the hand fingers and that is the way by which the users won't drop down the drawer if in case it comes out from its slide tracks accidentally. All the other drawers in the dresser are made the same way too. Inspect the drawer runner for a bumper or an incline that is keeping the drawer from pushing in. Thanks! I prefer this because as it ages, the drawers won’t randomly open. If the panel fits back into grooves the right way, secure it firmly into place with wood glue before replacing the drawer. Look in the back for any contents in the drawer box that might be sticking up or out the back of the drawer box, preventing it from completely closing. Apply nylon drawer slide tape to the wooden drawer runners if the wax lubrication doesn’t free up the sticking drawer. They also could be off their track which would make them hard to remove. Thank you for any help. Deep, reliable drawers hold up to 60 pounds and open quickly and quietly. Thank you so much for this! Looks more "polished" than other fabric drawer dresser. Improve this answer. Any tips on how to fix this? You can also hold onto the front bottom of the drawer if it’s easier to pull it out that way, but just be sure to keep your fingers away from the drawer’s tracks. After working it this way, it was freed up, but I think I later added some lubricant to the runners. (09/25/2008). A home owner from Florida says: June 25, 2018. These open by simply rolling the drawer fully out and lifting the wheels on the back of the drawer up off the track and then pulling them out. It turned out that the screws that hold the roller tracks to the sides of the drawers, weren’t screwed down tight enough. After closing the top drawer of my 4 door dresser, i tried to open another drawer. Remove anything that might prevent the drawer from closing all the way. Reply. Yes, we’re strapping the dresser to the wall. Ask MetaFilter is a question and answer site that covers nearly any question on earth, where members help each other solve problems. ThriftyFun is one of the longest running frugal living communities on the Internet. Let the glue dry fully, using clamps as it dries if needed, before returning the drawer to the frame. They do not lift to come off the track like most every drawer I've had in the past. Read on to see the answers provided by the ThriftyFun community or ask a new question. OK, here's the problem. Enjoy the understated beauty and classic style of this dresser. This way I was able to open it fully. That is what you do once the drawers are opened but how do you get the stuck drawers open to start with? You can use Bondo to build onto the side of the drawer and replace the broken area. It happened to me and my first inclination was to dump the thing. If you find a little lever, push it up or down on both side of the drawer, and then give the drawer a little tug. I am looking for tips on how to unstick dresser drawers. If it has a center support (as mine do), also run the wax through that so it glides easier too. What can I use to keep this from from happening again? I had problems opening drawers because the dresser wasn't level. I suspect it impacts the ability of the drawer to close completely. I have a video of my issues. Fixing the drawer will also keep it structurally sound, eliminating the need to completely replace the parts and façade. This drawer is stuck! Since … Pull the drawer half open and reach inside. I worked at a furniture store once and we would put a light under the piece of furniture to get rid of the moisture from the wood. Step 2 Inspect the guides for bends, and check to see if they are level. If it's like my dressers, they are solid, vintage wood, that swell in the humidity. Then using a ruler, piece of cardboard, or other flat object, work it into the gap so it rests above the drawer contents and presses down on them (or just guides them) to free them from the drawer or frame above. Joslyn. Open the drawer completely, and you will be able to easily see the anti-tip cable, which will be attached to the rear exterior of the drawer. Uneven slides may cause the drawer to slide open on its own. Pull the drawer out all the way once it’s released. It had a large heavy TV sitting on top of it for years. When she was staging a home for a client, she needed a dresser but didn’t have one that would work in her inventory. These drawers can be removed by rolling the drawer fully out and lifting the two levers on the inside of the track. You may have to do this a couple of times but try inserting the drawer and pulling it in and out in order to build up the wax on both the bottom of the dresser and where it comes in contact with the drawer. The primary reason for self-closing drawer failure is improperly installed guides or a drawer that was built out of square. I am looking for a dresser drawer stop plastic hardware. … Over time the rails from the drawers can become loose and drawer parts can become misaligned. Ask MetaFilter is where thousands of life's little questions are answered. The dresser is a Thomasville. Open it so it jams then back it off a bit, so whatever is causing the jam is not stuck. Thanks! Place them in the space between the drawer and the lateral case. This really helps. Don’t assume your drawer won’t come out just because it stops when you pull on it. My dresser drawer won't close all the way. Now it’s time to see if something is really broken and creating a hard block. I have four drawers stuck in my little wooden dresser. But none of them will open now! Cheryl H. October 6, 2016 at 7:58 am. These are archives of older discussions. If drawers are improperly installed, overloaded, slammed too hard or abused they can get sloppy. Some drawer slides contain a safety lock that prevents the drawers from pulling out all the way, which can cause injury. Of course, you must have the piece inside in an air conditioned room. Its like they are so swollen from the humidity that they are glued to sides. Don’t ask me why they put the slab of wood in. Helpful 4. The drawers have hooks at the back. Try taking an old candle and rubbing along the sides of the drawer. Empty the rest of the drawers. I’m on it now, Dad. Push shut and rattle each one of the drawers. Using equal pressure push down on both sides forcing the lock bars down. I have a dresser that was my grandmother's; it is over 80 years old and made of real wood. Get a level and put it on the top of your dresser and if it isn't level stick something under it and level it up. So she looked in her own home and realized that her personal dresser would work perfectly in her client’s bedroom—so she took all of her stuff out and staged it in the home. … Make a neat, continuous thread of wood glue all around the drawer panel at the groove or slot. I mean, they pull out so you can use them, but we couldn't get them all the way out to look at the construction behind them or for maintenance or anything. Open and close its multiple times to ensure that it is working properly. A convenient dust panel under the bottom drawers keeps your clothing protected. I took one star off for the drawers - while they are a nice size, you can only open the drawer a little more than halfway - so it goes back a little over 13", but it only pulls out to 7". We're shopping for bedroom furniture after a fire and found a set we like that's in the range Allstate gave us (cheap). In the end I got a long wood saw and managed to slide it in from the side where I knew the drawer was stuck. :D. posted by NotSoSiniSter to Home & Garden (5 answers total) Push shut and rattle each one of the drawers. The drawers seem a tad tight (they don’t slide as easily as I thought they would) and the soft close kicks in but then leaves the drawer open about 1/2”.
One thing is certain: you can’t go wrong with this 4 drawer dresser! I know from my own roll piece (mine has a draw door roll--not the roll top but it has the same issues as a roll top sometimes), that there are stops and things that can get turned that need turned back. Drawers, like those from dressers, are made to smoothly open and close. In some models, you can keep gently pulling the drawer after it stops and it will release and come out. This is honestly one of my top 3 pieces of furniture in my house - highly recommend!! Unfortunately some newer furniture is made very cheaply - we had some particle board dressers with uneven threads for the drawers - which we couldn't manage to fix & finally just tossed! This versatile dresser blends in easily with any décor and it’s incredibly easy to maintain. Sometimes it's engaged by a spring, sometimes by gravity. Then you can take an old candle, or paraffin wax, and rub the runners really good on the bottom of the drawer. We have tried rearranging them, but there is always one that won't go in all the way (the top edge gets caught). :D. How do I open them without damaging anything? A YouTube video clearly shows this. Only issue - wish drawer had a "catch' to keep it from pulling all the way out (that would ahve earned this great piece 5 stars!). Have you pulled the drawer all the way out to see if something is stuck behind it? I have had it for 4 years - type 20FDBM I had a problem where a couple of drawers in a 4 drawer dresser would only slide halfway out. If they have glides, clean them out while you have the drawer out. Fixing Dresser Drawers That Stick After Painting. This has nice deep drawers that go all the way to the back of the dresser. Any suggestions? A numer of times I've had drawers not open due to their bottom panels sagging down or falling out of their grooves. Place this runner on the left side of the drawer. So how do you remove a dresser drawer with a center metal slide? Are you having trouble opening your filing cabinet drawer? Bring plenty of storage space and modern style to your bedroom with this product. Any ideas on why the top three drawers are stuck? Really nice - easy to assemble. Loose drawer knobs can eventually fall off the face of a drawer, leaving you without a convenient way to open it. I recently got a used dresser, and when we went to put in the drawers, one of them will not go all the way in. For the normal drawers, they would stop with a sudden, hard resistance. Beautifully rounded moldings and clean lines offer a traditional Louis Philippe style that will complement many decors. Ask a QuestionHere are the questions asked by community members. Also, if you have keys on the drawers, they can get jammed up if the key does not fully release the lock. I would not put anything on the drawers until you are sure of the problem. Glue it back on. Don't decide between storage and a stylish look in your space: Get both with this 6-drawer dresser. Follow answered May 16 '13 at 12:06. It should work after only one or two applications of the wax on the drawer bottom(s). Plus I think the wax may help with getting dampness in the wood. Love the style but the color is way off! It seems unlikely a table drawer could have anything underneath stopping it, but do look under the table at the underside of the drawer. I so appreciate the video showing how to attach the wood block/toggle to the drawer. That makes it hard to fish out stuck behind a dresser drawer. It helps it to slide more easily. My drawer would only open about 3 inches but then there was the lip of the cutlery tray to contend with. I tried a plastic flexible cutting board as suggested above, a wire coat hanger and a wooden ruler but they were all too short. Almost all drawers have "catch" mechanisms built in to prevent the drawers accidently pulling all the way out when being opened, and thus "dumping" all their contents on the floor, or worse, falling on your foot and causing injury. They don’t pull out all of the way which I’m sure is to prevent it from falling over if all the drawers are open at once. Was it worth it? Simple is better! 2) So you don’t lean on the extended drawer and rip it off. I've done that and avoided future problems. How to Adjust Drawers. But none of them will open now! They have not been painted shut but are stuck because they got damp/wet. Open the drawer as far as possible. This storage chest was made to withstand everyday use and look good doing it. Mrs. C December 6, 2017 at 2:02 pm. And just to clarify, what's the exact model? I bought some 18” soft-closing drawer slides from Menards and I can’t (FOR THE LIFE OF ME) get them to shut all the way. Open and close it a few times to see if your repair job was successful. You can also use paraffin wax, which also works great for stuck clothing zippers. I can physically close the drawer all the way, but the soft close just won’t close it all the way. Two of the drawers of my father's roll top bureau are stuck. Wiggle each slide with your fingertips. Drawer slides come in set sizes and maybe this is what he is set up to do and just builds them all that way. I wax the runners to help them glide in and out. AKA, it's serving up some major mid-century vibes. ~ by Sandi. (It probably isn't damp, this being Phoenix, AZ.) It's a 5-minute fix. You can coat the bottom of the edges of the drawers with soap. Any idea what part I should try to purchase? Which should make it more obvious there’s a stopping mechanism behind it. I have always found annoying that some drawers open only 34 of the way leaving the back half of the drawer not easily accessible, but this one opens a little more- probably 45 of the way. How to Adjust Drawers. (12/05/2006). Step 1. If it's like my dressers, they are solid, vintage wood, that swell in the humidity. How to Tighten Loose Drawer Knobs. It may like to stay open just a couple of inches or so, or it may swing open all the way after you try to close. The next day, it would have all the drawers free and easy to open. Only just. Helpful . I’m sure there’s probably a good design reason for it. The next day, it would have all the drawers free and easy to open. Then, turn the block vertically and push the drawer all the way in. Step 2: Then the users need to press down the levers at the same time and the best way to accomplish this step is to use both the thumbs or the forefingers in order to dissociate the levers while upholding the base of the drawers with the rest of the hand fingers and that is the way by which the users won't drop down the drawer if in case it comes out from its slide tracks accidentally. All the other drawers in the dresser are made the same way too. Inspect the drawer runner for a bumper or an incline that is keeping the drawer from pushing in. Thanks! I prefer this because as it ages, the drawers won’t randomly open. If the panel fits back into grooves the right way, secure it firmly into place with wood glue before replacing the drawer. Look in the back for any contents in the drawer box that might be sticking up or out the back of the drawer box, preventing it from completely closing. Apply nylon drawer slide tape to the wooden drawer runners if the wax lubrication doesn’t free up the sticking drawer. They also could be off their track which would make them hard to remove. Thank you for any help. Deep, reliable drawers hold up to 60 pounds and open quickly and quietly. Thank you so much for this! Looks more "polished" than other fabric drawer dresser. Improve this answer. Any tips on how to fix this? You can also hold onto the front bottom of the drawer if it’s easier to pull it out that way, but just be sure to keep your fingers away from the drawer’s tracks. After working it this way, it was freed up, but I think I later added some lubricant to the runners. (09/25/2008). A home owner from Florida says: June 25, 2018. These open by simply rolling the drawer fully out and lifting the wheels on the back of the drawer up off the track and then pulling them out. It turned out that the screws that hold the roller tracks to the sides of the drawers, weren’t screwed down tight enough. After closing the top drawer of my 4 door dresser, i tried to open another drawer. Remove anything that might prevent the drawer from closing all the way. Reply. Yes, we’re strapping the dresser to the wall. Ask MetaFilter is a question and answer site that covers nearly any question on earth, where members help each other solve problems. ThriftyFun is one of the longest running frugal living communities on the Internet. Let the glue dry fully, using clamps as it dries if needed, before returning the drawer to the frame. They do not lift to come off the track like most every drawer I've had in the past. Read on to see the answers provided by the ThriftyFun community or ask a new question. OK, here's the problem. Enjoy the understated beauty and classic style of this dresser. This way I was able to open it fully. That is what you do once the drawers are opened but how do you get the stuck drawers open to start with? You can use Bondo to build onto the side of the drawer and replace the broken area. It happened to me and my first inclination was to dump the thing. If you find a little lever, push it up or down on both side of the drawer, and then give the drawer a little tug. I am looking for tips on how to unstick dresser drawers. If it has a center support (as mine do), also run the wax through that so it glides easier too. What can I use to keep this from from happening again? I had problems opening drawers because the dresser wasn't level. I suspect it impacts the ability of the drawer to close completely. I have a video of my issues. Fixing the drawer will also keep it structurally sound, eliminating the need to completely replace the parts and façade. This drawer is stuck! Since … Pull the drawer half open and reach inside. I worked at a furniture store once and we would put a light under the piece of furniture to get rid of the moisture from the wood. Step 2 Inspect the guides for bends, and check to see if they are level. If it's like my dressers, they are solid, vintage wood, that swell in the humidity. Then using a ruler, piece of cardboard, or other flat object, work it into the gap so it rests above the drawer contents and presses down on them (or just guides them) to free them from the drawer or frame above. Joslyn. Open the drawer completely, and you will be able to easily see the anti-tip cable, which will be attached to the rear exterior of the drawer. Uneven slides may cause the drawer to slide open on its own. Pull the drawer out all the way once it’s released. It had a large heavy TV sitting on top of it for years. When she was staging a home for a client, she needed a dresser but didn’t have one that would work in her inventory. These drawers can be removed by rolling the drawer fully out and lifting the two levers on the inside of the track. You may have to do this a couple of times but try inserting the drawer and pulling it in and out in order to build up the wax on both the bottom of the dresser and where it comes in contact with the drawer. The primary reason for self-closing drawer failure is improperly installed guides or a drawer that was built out of square. I am looking for a dresser drawer stop plastic hardware. … Over time the rails from the drawers can become loose and drawer parts can become misaligned. Ask MetaFilter is where thousands of life's little questions are answered. The dresser is a Thomasville. Open it so it jams then back it off a bit, so whatever is causing the jam is not stuck. Thanks! Place them in the space between the drawer and the lateral case. This really helps. Don’t assume your drawer won’t come out just because it stops when you pull on it. My dresser drawer won't close all the way. Now it’s time to see if something is really broken and creating a hard block. I have four drawers stuck in my little wooden dresser. But none of them will open now! Cheryl H. October 6, 2016 at 7:58 am. These are archives of older discussions. If drawers are improperly installed, overloaded, slammed too hard or abused they can get sloppy. Some drawer slides contain a safety lock that prevents the drawers from pulling out all the way, which can cause injury. Of course, you must have the piece inside in an air conditioned room. Its like they are so swollen from the humidity that they are glued to sides. Don’t ask me why they put the slab of wood in. Helpful 4. The drawers have hooks at the back. Try taking an old candle and rubbing along the sides of the drawer. Empty the rest of the drawers. I’m on it now, Dad. Push shut and rattle each one of the drawers. Using equal pressure push down on both sides forcing the lock bars down. I have a dresser that was my grandmother's; it is over 80 years old and made of real wood. Get a level and put it on the top of your dresser and if it isn't level stick something under it and level it up. So she looked in her own home and realized that her personal dresser would work perfectly in her client’s bedroom—so she took all of her stuff out and staged it in the home. … Make a neat, continuous thread of wood glue all around the drawer panel at the groove or slot. I mean, they pull out so you can use them, but we couldn't get them all the way out to look at the construction behind them or for maintenance or anything. Open and close its multiple times to ensure that it is working properly. A convenient dust panel under the bottom drawers keeps your clothing protected. I took one star off for the drawers - while they are a nice size, you can only open the drawer a little more than halfway - so it goes back a little over 13", but it only pulls out to 7". We're shopping for bedroom furniture after a fire and found a set we like that's in the range Allstate gave us (cheap). In the end I got a long wood saw and managed to slide it in from the side where I knew the drawer was stuck. :D. posted by NotSoSiniSter to Home & Garden (5 answers total) Push shut and rattle each one of the drawers. The drawers seem a tad tight (they don’t slide as easily as I thought they would) and the soft close kicks in but then leaves the drawer open about 1/2”.